Exact MPN14 sourced attributes1 source document

NXP Semiconductors · exact orderable part

PCA82C250T

NXP 5 V classical CAN transceiver for ISO 11898 networks up to 1 MBd in an 8-lead SO package (SOT96-1).

Supported CAN Standard: ISO 11898
Maximum Data Rate: 1 Mbit/s
Galvanic Isolation: No
Package / Case: SO8 (SOT96-1)
Minimum Supply Voltage: 4.5 V
Maximum Supply Voltage: 5.5 V

Original manufacturerCommercial terms confirmed per lot

ManufacturerNXP Semiconductors

Package / caseSO8 (SOT96-1), 3.9 mm body width

Mounting typesurface mount

Temperature grade-40 to +125 °C ambient

Technical parameters

Technical specifications

14 normalized values · 1 manufacturer source

Report a data issue

PCA82C250T technical parameters
Parameter	Value
Supported CAN Standard	ISO 11898 [1]
Maximum Data Rate	1 Mbit/s [1]
Galvanic Isolation	No [1]
Package / Case	SO8 (SOT96-1) [1]
Minimum Supply Voltage	4.5 V [1]
Maximum Supply Voltage	5.5 V [1]
CAN Bus Fault Protection Range	-8 to +18 V [1]
Operating Modes	High-speed; slope control; low-current standby [1]
Minimum Supported Nodes	110 [1]
Typical Receiver Hysteresis	150 mV [1]
Operating Ambient Temperature	-40 to +125 °C ambient [1]
Package Dimensions	SO8; 3.9 mm nominal body width [1]
Pin Count	8 [1]
Thermal Shutdown	Yes [1]

Specification references[1]NXP PCA82C250 CAN Controller Interface Product Data Sheet, Rev. 06, 25 August 2011 ↗

Product overview

PCA82C250T at a glance

PCA82C250T is an NXP 5 V classical CAN transceiver for ISO 11898 networks at data rates up to 1 MBd. The exact T suffix in this record uses the eight-lead SO8 package version SOT96-1.

Key features

Verified device capabilities

ISO 11898 classical CAN physical-layer transceiver
Data rate documented up to 1 MBd
4.5 V to 5.5 V supply range
High-speed, slope-control and low-current standby operating modes
Documented bus fault range of -8 V to +18 V
Eight-lead SO8 package, NXP package version SOT96-1

Applications

Where the device is used

Legacy classical CAN nodes whose 5 V supply, 1 MBd ceiling, mode control, package and bus-voltage requirements match the PCA82C250T datasheet.

Ordering information

Exact code and packing

Retain the full PCA82C250T order code and confirm quantity, destination and packing in the RFQ.

Sourcing PCA82C250T does not establish a modern replacement or a drop-in migration path.

Design notes

Use the rating in context

This device is documented for classical CAN up to 1 MBd; no CAN FD capability is claimed.

Review slope-control, standby behavior, pinout, bus fault limits and termination before using it for maintenance or redesign.

Quotation and fulfillment

What is confirmed before an order

Commercial facts belong to the quoted lot. The catalog does not invent live stock, price, date code or lead time.

Exact-part check

Manufacturer, full suffix, package, quantity and requested documentation are captured in the RFQ.

Lot-level quotation

Price, available quantity, date code, condition and lead time are written into the quotation when confirmed.

Inspection request

Label, marking, packing and traceability requirements can be specified before shipment.

Shipping and payment

Shipping method, Incoterm and available payment route are agreed in the commercial offer.

Technical and ordering FAQ

Questions buyers ask about PCA82C250T

Answers distinguish the IC itself from assembled modules and keep absolute limits separate from normal operating conditions.

Does PCA82C250T support CAN FD?

No CAN FD capability is established here. The controlled NXP datasheet documents classical CAN operation up to 1 MBd.

What supply range is documented for PCA82C250T?

The controlled datasheet lists a 4.5 V to 5.5 V supply range.

What package does PCA82C250T use?

The T order code uses the eight-lead SO8 package version SOT96-1.

Catalog relationships

Keep family and exact MPN intent separate.

This page describes one orderable part. A family page helps select suffixes but never carries assumed stock or a price.

ManufacturerNXP SemiconductorsView brand page →CategoryCAN TransceiversView category page →Part familyPCA82C250Compare exact variants →

Reviewed comparison paths

Evaluate alternatives without assuming drop-in compatibility

Every path below passed electrical, package, pinout, firmware and compliance review. The linked verdict controls; similarity alone is not approval.

Engineering validation required

CA-IF1051HS

Choose a modern candidate from the network requirements; an SOIC8 body is not a compatibility decision.

Open evidence-backed comparison →

Ready to source

Request PCA82C250T by quantity

Send the exact MPN, quantity and any date-code, packing or documentation requirements. You can also add more lines or upload a BOM.